THIS BLOG IS FOR ASSIGNMENT PURPOSES ONLY.
For level 1, it is easy. the solar panel just needed to be placed in the direction of the light source.
Level 2, water is needed to run the turbine.(which has to flow from the top to the turbine.
Level 3, the wind turbine needed wind flow to generate electricity to power up the kettle and heat up the heater to generate energy.
Level 4, the electromagnet is needed to attract the kettle and the heat to the same location for energy to be generated.
Level 5, electromagnet is needed to attract the kettle to power up the light source to transfer energy to the solar panel.
Level 6, The mirrors (2 mirror each for each lasor beam) are to reflect the beam to generate power in the source.
Level 7, (Just try your luck to arrange the mirrors will do) Also, the electromagnet is needed to attract the mirror to create an alternative path for the lasor beam to travel.
Level 8, The battery is needed to charge the heater and the 'wind generator' while the current was disconnected form the circuit, to provide'constant energy' for the current to get to the source.
Level 9, the condenser needed to be connect with the heater, the magnet and the battery. The magnet will change to position of the kettle while the battery will provide the remaining energy while the circuit is open.
Level 10, the robot will carry the kettle away, such that water can flow to the turbine. While the battery will provide the remaining energy.
Level 11, the metal ball will knock out the windmill such that the charging blub will be able to generate light energy.
Level 12, the ball is needed to knock out the blocks, which will provide the pathway for the lasor to shoot a beam. The mirror at the bottom left hand side is a constant. Which gives a hint for the position of the lasor beam generator. Two panels are needed to power the circuit. The rest are very straight forward.
Level 13, the correct arrangement of the mirrors are relatively complex. The robot is needed to move the mirror till it was stopped by the box. The laser beam will then follows. The last transfer of energy was by the kettle to the heater, after being transferred by the water turbine, which was powered by the water the gets energy from the lasor beam energy transformer.
Level 14, the wind is needed to move around the heaters. The magnet will attract the heater in the middle wire, while the robot will carry the wind generator to divert the air current away once the metal ball had knocked the obstacles: the two wind generator away.
Level 15, (requires many trial and errors)--- of which the conclusion was that the first robot was required to carry the mirror leftward as it moves, horizontally. While the other robot was required to carry the battery away such that the charge bulb would be able to light up. The three ball will knock down all the components in three lanes, downward, to provide path for the moving robot holding the mirror. The shortcut for overall levels is to "Start with the end in mind" look and guess the components for the last wire, what will the components be and how will energy be transferred to it?
